10% off service for new customers! Contact us for more details. View all offers.
When your furnace starts acting up, call Altruistic AC, Heating & Plumbing, a licensed and insured company offering furnace repair in Georgetown to keep homes warm on cold nights. We work with care and offer clear explanations and upfront pricing. Call today to restore your home’s heat.
Georgetown winters rarely settle into a steady rhythm. You might wear shorts on Tuesday and scrape ice off the windshield by Thursday morning. This fluctuation means your furnace starts and stops more often than you’d expect, and all those starts wear on the same few parts. Take a look at the most common culprits behind a cold furnace.
Cedar season peaks December through February, right when furnaces run hardest, and that fine pollen can clog a filter in weeks. Once airflow drops, the furnace overheats and a safety switch shuts it down. Swapping a clogged filter can bring back heat in minutes, so it’s worth checking first.
Months in a Georgetown attic, where summer temperatures can top 130 degrees, leave the thin ceramic parts of an igniter brittle. When the furnace tries to kick on for the first time but never lights, it’s usually because of a bad furnace igniter. The good news is that this is usually a quick fix.
If the burners light, run for a few seconds, then shut off, the fix is often just cleaning the flame sensor, a small rod that confirms the burners are lit. After a long Central Texas off-season, residue coats it until it can’t detect the flame, and the furnace shuts the gas off to stay safe. Having a technician clean it can restore operation.
After storms like Winter Storm Mara drop tree limbs and knock out power across Georgetown, your furnace can be affected more than you realize. When power is restored, surges can damage the furnace’s control board. If this is the problem with your unit, we test the board, swap it if needed, and run a full heating cycle before we leave to ensure everything is in tip-top shape.
Most furnace hiccups can wait until morning, but some need to be addressed as soon as possible. Knowing which ones can’t wait gives you peace of mind on a cold night. Here are the top signs you need urgent furnace repair in Georgetown, TX.
If you smell a rotten egg odor coming from your furnace, getting everyone outside is what matters most. Once your family and pets are safe, call 911 or your provider’s emergency line. Depending on your neighborhood, that could be Atmos Energy, Texas Gas Service, or your propane company.
After you’re given the all-clear, we’ll find the source of the leak and make the repair.
When the first cold front rolls through Georgetown and you switch on the heat, a dusty smell is normal and usually fades within an hour. A smell that lingers or turns to hot plastic is different.
Turn the furnace off and call our technicians ASAP. Overheated motors and damaged wiring are often the reason a faulty furnace can cause a fire.
A carbon monoxide alarm is doing its job when it sounds, so treat every alert as real. Get everyone outside and call 911 so the Georgetown Fire Department can check the air, and keep the furnace off until it’s inspected. We’ll check the heat exchanger, flue, and venting and fix what we find.
Healthy burners burn a steady blue, so a peek through the furnace’s viewing window can tell you a lot. Yellow flames or a buildup of soot mean the gas isn’t burning cleanly, which can raise carbon monoxide levels. At Altruistic, our team can correct any issues leading to poor combustion.
Ask a few Georgetown neighbors how they heat their homes, and you might hear a few different answers. Gas service varies from one neighborhood to the next, from Sun City to Parmer Ranch, so one house may run on a natural gas line, the next on a propane tank, and another on electricity alone.
Whatever’s in your attic or hall closet, our team has you covered with timely and expert furnace repair in Georgetown.
Natural gas heats a big share of homes in town, so the quirks of gas furnaces are familiar territory for us. A gas furnace repair in Georgetown, TX, often comes down to fixing an inducer motor, pressure switch, or gas valve. These parts work together to light the burners safely, and replacing one usually brings the heat right back.
A propane furnace runs as reliably as a gas one when its pressure is right, which is where most propane repairs start. A misadjusted gas valve or clogged burner orifice can cause weak heat or repeated lockouts. We check the pressure and clean or replace whichever component is off.
Electric furnaces have no burners or gas lines, so repairs tend to be simpler than people expect. Most require attention to the heating element, the sequencer that switches components on in stages, or a tripped breaker. Our experienced technicians handle it all.
When the heat goes out, the questions come quickly, and on a cold night, you just want straight answers. Here are answers to your most burning questions, from what a repair costs to what to do when the furnace won’t start after a power outage.
Your price depends on the part needed and the type of system you have, since a furnace on acreage outside town and a gas unit in a Sun City home can need very different repairs. We diagnose the problem and quote the full price before any work starts. We also have financing options to help with larger repairs.
Most repairs are done in a single visit because the parts that wear out most, like igniters and flame sensors, ride along on our trucks. When a furnace needs a less common or brand-specific part, we’ll order it, let you know when it should arrive, and come back to finish the job.
Most furnace repairs don’t need a permit. The city exempts replacing minor parts like igniters, flame sensors, and capacitors, as long as the work doesn’t alter the equipment’s approval or make it unsafe. Gas line repairs do require a permit, and we’ll pull it for you when the job calls for it.
Many newer homes in Parmer Ranch and other growing neighborhoods still have furnaces under manufacturer parts warranties, which is why it’s a relief for many homeowners that a repair done the right way shouldn’t put their coverage at risk. We document repairs and use covered parts when they apply to keep the fixes compliant.
After an outage, many furnaces lock up as a safety step and simply need a reset. Switch the thermostat off for five minutes, check the breaker and the furnace’s power switch, then turn the heat back on. If it still won’t start, it’s time to call for heater repair in Georgetown.
Start with the thermostat. Georgetown’s warm winter afternoons make it easy to leave it on cool, or with the fan set to “On,” which keeps air moving between heating cycles. If the settings look right, a clogged condensate line or burners that won’t stay lit may be the culprit.
Altruistic AC, Heating & Plumbing is the best furnace repair company in Georgetown because we’re a locally run team that treats your home like it’s our own. We only recommend services you actually need and take care to correct the problem on the first go. We also offer free estimates.
Nobody should have to wait for the next warm afternoon to feel comfortable at home again. Call us, and we’ll set up furnace repair in Georgetown at a time that works for you. We’ll find the problem and get steady heat back in every room.